
Just like any brand new car, this Ford Kuga is no exception. We always tell our clients that even though your car is brand new and a few days old, it does not mean that the production date was a few days old. Most cars are stored in open air warehouses till the batch is complete. Prior completion of the batch, the car might have been left outdoors for a extensive time, hence the elements will be damaging the paint.

Upon arrival, we started to inspect the car, with limited time and a huge surface area to work on, we started immediately.

The paint is swirled up.

Holograms are also visible.

We assume that the car had to have some serious stains as the entire car had been polished.

Due to the lack of experience with a rotary buffer, the person that polished the car left us tonnes of paint correction to do.

The wheels looked like they had some very greasy tyre shine on it.

A closer look and the thickness of the brake dust is just speechless.


Wasting no further time, we started with the standard deep clean, scrubbing the low quality tyre shine off.

Although the paint had been polished, it was not detailed, hence most trim and edges of the car is stain covered.

We also clayed the car as we found the paint to be very rough. Claying will smoothen the paint and also show us how dirty it is.

After much intense cleaning and stain removed, we polished the paint. Here is the after.

Immediately, the shine was restored and gloss enhanced, this time, the owner came by and was just blown away.


After around more than 8hours of paint correction, we applied Opti-Coat Pro for the final protection. Check out the results. White, can have the wet glossy look too.

opti-coat pro
All posts tagged opti-coat pro

This, in our opinion is one of the best looking Proton car ever made, From looks, performance, even to the wheels, is good looking. Unfortunately, its locally made and lacks the quality. Paint work is not a main concern when manufacturing low budget cars, Hence we are here to enhance the paint work for the car the last longer with its shine.

Upon arrival, we can see that the car seem to be in a good, glossy and shiny state which is also common as Proton sales representative will never put the extra effort to get the polishing or waxing done for its new clients.

The car is barely few days old when we arrived. Visible weather stains can be found

On the areas that water flows down, stains are visible.

There were some tar spots, although minor but still a pain in the butt

Tar spots were removed.

Paint was given a light polish as there were no visible swirls.

At a different spot.


This post was written to show that we are professionals, even when it comes to local cars with bad paint work. Although it is not a very expensive car, the client was still willing to spend to protect. What are you waiting for?


We are all the way in a rural village to get this Nissan Xtrail corrected and Opti-Coated. The car is brand new, barely reaching 3 days old. Due to its area of activity, its constantly exposed to mud, rain, bad road conditions, etc.

Upon arrival, we saw the car in a rather poor lighting condition. Making the car glossy as ever.

As we our eyes got closer to the car. There you can spot the amount of dirt.

On the glass, its a mixture mud, rain and sand.

We got our LED out and check the paint. Swirls were visible on the paint even though its white.


We washed the car and found that the paint had 0 protection.

On the glass, the water doesn’t flow off at all.

After finishing with the cleaning, we moved on to the correction stage. Here is step 1. Still some minor not so visible swirl.

Final step fully removed the swirl. Due to the age of the car, the damages are on a few areas only, hence we did spot repairs.


Finally, after about 5hours, we finally got to the coating stage, here are the results of the coat.

