Opti-Coat™Pro & Pro Plus

user posted image
Optimum Auto Detailing presents to you, Opti-Coat™Pro with Pro Plus

With more than 200 professionally treated cars all over Malaysia and South East Asia, we are the only detailers around that can be considered as International Detailers as we have done jobs throughout East Malaysia, West Malaysia, Singapore, Taiwan, and we are willing to go anywhere on earth to get your paint job right and protected.

Our Motto of Detailing work is to show and provide our customers the utmost passion and detailed attention to their cars because we know that you chose us for that particular reason.

We will detail and perform professional coating treatment for your car even if its a beat up old Datsun, BMWs, Mercedes and Lamborghinis, as long you have the passion for detailed perfection, we are here to give you that attention of detail.

We believe that the best things does not always have to be super expensive, therefore we bring in the products by ourself direct so that we do not need to go through any other channels that will mark up further and cause the final pricing to be expencive.

We were affiliated with Detailien but we are at a different direction now. Therefore, to provide our customers with the cheapest and best Professional Automotive Coating Treatment, we are willing to go the extra mile to get our product directly from the manufacturers.

user posted image

Official Website

What is Opti-Coat™Pro
Optimum Coating is a semi permanent coating that protects automotive paint over its lifetime! Unlike a wax or sealant, Opti-Coat™Pro will not wash or wear off. It acts as a second layer of clear coat which provides increased protection against the elements.

Opti-Coat™Pro is a clear resin coating, much like the clear coat that already exists on your vehicle. And just like your factory clear coat, Opti-Coat™Pro is meant to be permanent! Opti-Coat™Pro can be applied to all exterior surfaces. For other exterior surfaces, Opti-Coat™Pro is a highly effective, transparent protective coating. Unlike Taflon, Polymer, Glass, Diamond, Nano or other coatings, Opti-Coat™Pro is the only paint bonding coating which becomes a part of the existing clear coat. This will prevent peeling or degrading in any form.

Here we can see the different category and characteristics of the coatings in the market.
user posted image

Now what is Opti-Coat™Pro Plus?
Opti-Coat™Pro Plus is the latest technology advancement for the Opti-Coat™Pro Series, the Opti-Coat™Pro Plus can only be applied onto the car when the car had already been applied with Opti-Coat™Pro. Which result in a much stronger and durable second layer to the original Opti-Coat™Pro layer. Manufacturers had developed the Opti-Coat™Pro Plus layer to give more shine, more gloss, more reflective and also higher resistance on watermark issues.

What are that are the surfaces that Opti-Coat™Pro and Opti-Coat™Pro Plus can be applied onto?
● Painted Surfaces of the vehicle
● Headlights and Taillights of the vehicle
● Alloy or Light Weight Sport Rims
● Plastic, Polyurethane Surfaces
● Aluminum and Chrome Surfaces
● Sticker and Decal surfaces
● Front and Rear Windscreen and other side windows
● Panoramic roof for some cars
● Sun roof for some cars

How Do we apply Opti-Coat™Pro and Opti-Coat™Pro Plus
Opti-Coat™Prois a permanent coating that requires the paint to be finished properly before any application is done. Any blemishes or contamination on the paint will be permanently stuck under the coating if not removed prior application. On a professionally prepared paint finish, Opti-Coat™Pro will look clear, smooth, and clean.

How Does Opti-Coat™Pro Protects the Factory paint?
A single layer of Opti-Coat™Pro measures approximately 2 microns in thickness. Compared to other “paint protection” sealants, Opti-Coat™Pro is more than 100 times thicker with tests showing a wax coating measuring less than 0.02 microns.
This allows Opti-Coat to effectively absorb damage that would otherwise affect the factory paint layers. Swirl marks, light scratches, chemical etching is not only decreased by the harder clear coating, but the factory paint is protected by the thick outer Opti-Coat™Pro.

What are the effects of Opti-Coat™Pro that can be seen with the naked eye?
As Opti-Coat™Pro bonds and cures with the factory clear coat, you will be able to see a higher definition in gloss and shine. The touch felt on the surface after a fully cured Opti-Coated surface is rather tacky as the coating is providing a water beading or “Lotus Effect” on the paint’s surface.

You may view in this video What is Lotus Effect on Car Paint.

What are the benefits of applying Opti-Coat™Pro to my car?
Opti-Coat™Prowill provide the owner with a superior clear coat film that is highly resistant to chemical etching, harder than factory clear coat to reduce swirls and scratches, and a permanent hydrophobic surface that is easier to clean and stays cleaner for longer.

Can I buy Opti-Coat and apply it myself?
No. Opti-Coat™Pro is available only to selected professionals. Application requires an experienced technician to avoid extensive damage to the factory paintwork.

How long does it take to apply Opti-Coat™Pro to my car?
The application of Opti-Coat™Pro itself may take only 1-2 hours. Preparation required beforehand may take an additional 1-2 hours. Depending on the condition of the car, used cars in particular, preparation including swirl removal may take a number of hours. The main thing is the curing period of the coating takes at least 6 hours. It is recommended to not have any contact to water or any liquid based substance.

Can I apply waxes and sealants or polish and Opti-Coated car?
Yes, you can apply additional waxes/sealants to the surface although it is not required. Opti-Coat once applied, becomes a permanent part of your vehicles paint system. Applying a wax or sealant on top of the Opti-Coat is no different to applying to factory clear coats. A NON ABRASIVE polish/paint cleaner can also be used to polish the vehicle. Unlike other paint protection systems that void the warranty, polishing away any contamination will actually enhance the performance of Opti-Coat!

Differences between Opti-Coat 2.0 and Opti-Coat™Pro
Opti-Coat 2.0 a consumer version of the Professional version Opti-Coat™Pro. The main difference will be the durability, thickness and the definition of gloss and shine. Most people may compare Opti-Coat™Pro with many other coatings in the market but by experience we have with Opti-Coat™Pro, we are proud to say we have no receive any complains regarding quality of the coating compared to other coating which may have more problems with stains from bird dropping
The differences can be seen in the table below.
user posted image
*Opti-Coat2.0 is no longer in production.

Will Opti-Coat™Pro work on single staged old school paint?
Yes, Opti-Coat™Pro will work on single stage paint

How is the durability in Malaysian weather?
I would say the durability is rather suprising for Opti-Coat™Pro. We have found that many coating cannot withstand the heat hence degrade too fast. Opti-Coat™Pro on the other hand is developed in the rather hot section of the US which captures all the main component of Malaysian weather.

Price for Optimum Coating:
RM2000 for small sized vehicles from Perodua Kancil, Perodua Myvi, VW Polo
RM2500 For all Standard saloons, Executive Saloons Sized vehicle from VW Golf, Honda Accords, Lexus ES, BMW 5 Series.
RM3000 for SUV,CUV,4×4, larger -saloon cars like BMW 7 series.
RM3500 for Toyota Alphard, Toyota Estima and other extreme large vehicles.
We are the cheapest Opti-Guard pricing in Malaysia and South East Asia. We have coated more than 100 cars in Malaysia itself.

If you have more inquiries, Please do contact me at 014.6998277 or visit my site at www.optiautodetail.com or post on my facebook pagehttp://www.facebook.com/pages/Optimum-Auto…134543609971783

Optimum Auto Detailing provide the best warranty you can ever have!
We guarantee for 10 years that the coating will not FADEwill not OXIDISE, will not PEEL, will not TURN YELLOWwill not DEGRADE in any form, will not DEFORM in any way.

Opti-Coat™Pro is a hard wearing, aftermarket, ceramic clear coat for superior resistance to scratching (9H) and chemical etching from environmental impacts.
It provides permanent protection for all factory paints, and can also be applied to exterior glass, metal and hard plastic surfaces.
Unlike factory urethane clear coats, Opti-Coat™Pro does not oxidise over time and provides permanent hydrophobic surface characteristics that release water, dirt and grime so your car stays cleaner for longer.
Opti-Coat™Prois not a paint protection wax or sealant that will wash away, or break down over time. Opti-Coat™Pro bonds permanently with the factory coating, protecting the surface indefinitely and will not delaminate. No waxing or polishing is required. No special “pH neutral soaps” are required.

Further Information On Optimum Coating
Material Safety Data Sheet
How Does The Coating Protects The Paint

Durability and Stress test with different chemicals on Opti-Coat 2.0 vs Cquartz

Here are a small fraction of the effects of coating in picture form, you may surf to my website for more viewing
user posted imageuser posted image
user posted imageuser posted image
user posted imageuser posted image


54 comments on “Opti-Coat™Pro & Pro Plus

    • Hi, Optimum Coating is not for sale, we just sell the service. The Coating itself it for professional use only.

  1. Hi, can i know the best price for honda civic fb and polo hatchback opti-coat? reply me asap, thanks!

  2. Hi, i got my ford ranger since March 2014, but the new car did not gives me the shine like show room condition. Can quote me your price for coating on new car just to bring back the desire showroom shine?

  3. 1) Can I buy Opti-Coat 2.0 from your company?
    If so how long does it last normally-last?
    2) What is the price for enough to apply on a 2002 Jeep Grand Cherokee?

    • Also can I apply more than one coat of Opti-Coat 2.0 for longer lasting and better protection? If so how many coats are suggested for maximum protection?

  4. Hi.. can you pls give me the best price for newly bought CRV in Klang? Also.. after optiguard coating, can use any normal car wash? Where to bring the car for after sales support (if needed) ? Thanks.

  5. Hi ,
    I am very interest to have opti-coat on my new car which expects will arrive around this August.

    May I know if any pre- work on paint needed before applying te opti-coat ?

    Is the opti-coat able to apply every where outside the vehicle like plastic , chrome , headlights , windshield …..etc.

    Another question is , if a car already have some other coating , can opti-coat apply on top of it ?

    Looking forward to hear your professional advice.


  6. Please offer me a quote for my car sante fe 2015 and advise me the following question as well :

    1) What is the promotion package now ?
    2) Cost of maintenance for the coating
    3) Please quote only exterior of the car

  7. Hi, i have a Honda HRV bought amonth ago, would like to know the price for OptiGuard

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s