We have with us today a rather special Toyota Vellfire, unlike the common ones you see on the road, this is the G’s Edition. With a sleek looking upgrade on the body, red calipers, black wheels, and that murdered out sinister feeling when you look at the car in the front. Check out what we did to the car fresh from the recon car dealership.
Upon arrival, the car is already looking mighty glossy and wet look. That is because its black and black is forever deceiving to an untrained eye.
As we do the routine walk around, we squat down and spot the sun beaming into a tonne of swirl damages right at the side of the door handle.
At the top left corner of the car we spotted some clear coat unevenness that we could not sort out just with polishing.
Paint surface condition on the other hand is not that great.
Swirl condition covers most of the glossy black panels
Including some tight spots as well.
Looks shiny but swirls everywhere, who would have expected this?
Wheels and Tyres were covered in rust powder and brake dust.
Major difference after cleaning and Opti-Coat Pro coverage. See the caliper is more “Vibrant” now.
So a quick before paint correction under Phone flash.
Before paint correction under LED torch
Before paint restoration we can visibly spot swirls and light watermark stains.
More visible watermark stains.
Right before the final pass.
The side panels are in similar condition after the paint correction.
And Finally for an even more drastic gloss and wet mirror finish after Opti-Coat™Pro protection and coverage over the entire car. We present to you, a Brand New Toyota Vellfire, better than show room condition.
We’re in Penang again for this brand new Mercedes GLC250, collected from the dealership just 1 day ago before we were appointed to come over and get her coated! But brand new, doesn’t mean flawless paint condition.
Upon arrival, we spotted quite a few issues on the paint, number 1 was the watermarks.
Fuel door areas are usually covered in dirt and dust from storage.
You can even notice that slight discoloration from the dirt on the black plastic areas.
A closer look on the watermarks.
This car had been left outdoors for quite a while to have that type of watermark build up.
Even on the angled areas there were visible watermark etching.
Dirt and sand from normal driving is usually found on the rear end of the car.
Its been raining lately in Penang so road grime is very common on these areas.
We first started with the wheels and slowly moved on to cleaning other areas.
We found some weird haziness on the rear quarter panel. From even a distance you can see that haziness on the edge of the panel towards the door’s gap.
A closer look revealed heavy sanding marks.
On another angle.
After a couple passes, we corrected the haziness back to a proper shiny surface.
Other areas were corrected as well due to the watermark stains.
Swirl free and watermark free surface.
On the hood
On the doors.
The wheels were not very dirty to start with.
Some light brake dust from the usual driving.
Minor build up on the lugnut areas.
You can spot the difference in tone whereby the brake dust covered area is slight brownish.
Gave the wheels a good detailed wash.
and poof, one spanking clean wheel.
After many hours of detailing and paint correction, we finished the car off with Opti-Coat™Pro as the paint protection system. Check out the wet look and glossy finish as usual.
We are in Penang for this one of a kind, first of its kind BMW 330e, its one torque monster with that electric motor! This owner had previously detailed and coated his Audi A4 many years back, because of the quality we produce, he opted for us without hesitation when he got his new ride.
Upon arrival, the typical dusty exterior is spotted.
Because of long distance travel for about 500KM with some rain, watermarks formed on the hood together with dirt.
On the exterior, the car looks rather glossy, but not many can tell that there is underlying damaging hidden from the untrained eye.
We popped the fuel cap and it is found to be as dirty as a 1 year old car.
Because most dealerships want to save cost on Post Delivery Procedure, they usually opt for cheap and fast detailers. In results, you get free hologram damages.
More holograms on the side door.
Some hologram on the side fenders.
On the door.
and finally, more holograms on the door. Looks like we would be doing a full polish for this sweet ride.
We did our standard detailed wash to remove all contamination and moved on to the paint correction.
On the front bonnet, hologram cleared.
Other sections of the front bonnet.
And a final sun shot to double check on the paint condition.
Opti-Coat Pro applied after all the surface preparation. Check out the finishing, extremely glossy and wet looking.
PS: Refer to below link for this owner’s previous car’s article.
This classic racer is one of the most iconic Lotus ever. I remembered this little thing in games! From our previous article on the Porsche Boxster, the owner was speechless and impressed with our work so….Today we’re back at the Porsche’s home to detail and coat this ride. Before we started, the owner had briefed us that the car had been repainted and been detailed prior us. We didn’t expect the worst but it wasn’t the best either.
Upon arrival, the car looks glossy because of its body line. Its sexy for a car but a nightmare for a detailer.
The paint surface was found to be covered in stains from the first walk around inspection.
Watermarks were also 1 of the many issues as the car had been parked for quite a while.
The swirls amount on the other hand were not that severe since it barely driven.
We found some slight haziness on some panels which indicates oxidation.
On some sections, it was slightly better than others.
On the entire car, we only found 1 spot of hologram.
More stains found.
As usual, we gave the car a good old deep cleaning, removing most of the stains and watermarks along. We then moved on to polishing the car since we had insufficient time today. Here is an after shot.
Stains were removed.
We manually hand polished the taillights and signal lights. This is a Before.
Signal and taillights After. Notice the deeper tone and glossier finish.
The fuel cap was made of aluminum and was fully oxidized. This photo shows a 50/50
Its the small little details that brings out the overall finishing touch.
The glass was surprisingly mild with watermark since the owner mentioned he had left it at a parking mode for more than a year.
Cleared the watermark and coated the windscreen back to that hydrophobic state.
About 10hours of detailing later. We again finish off the car with Opti-Coat™Pro for long term paint protection and simply because its a quality product my clients would not deprived their rides from. Check out that wet finish, its like a swimming pool just that its white.
We have with us today a rather special guest. The owner had been a fan of our work for quite some time now and finally decided he couldn’t hold back anymore. Hence we’re here for his Porsche.
Upon arrival, we noticed there were quite a number of issues on the paint.
It still looks shiny and all since we last washed and wax the car but the true conditions of the paint are hidden from that gloss.
The owner had done quite abit of bug killing over the week.
Watermark stains were one of the main issues for this car.
That aside, we saw some tree sap stain as well.
Fuel door area are usually unattended and dirty.
Within the side skirts, lies the drainage area.
Where its usually this dirty after even 1 drive in the rain.
We saw some scuff damage on the side mirrors as well.
We gave the car a pretty detailed wash, removing everything from stains to tar spots. Unfortunately the watermarks were too stubborn. So we had to do some polishing to remove the watermark etching.
During the polish, watermarks are all gone.
Finally cleared up the surface for a proper and clear reflection.
The paint condition for this ride was pretty good. Just a little light swirls from regular washing.
More polishing was done and the paint came out swirl free.
On other sections, another swirl free finish.
Around the fuel door area, the swirls were a little bit more tough and some deeper ones were left behind. It might not be visible in this picture, but it is there.
European cars like these tend to have alot of brake dust hence the full coverage.
1 finger glide and you can see how thick is it.
Lug nuts areas were never cleaned since day 1.
We cleaned the wheel pretty good.
Even the barrel area since its very easily accessed.
Finally Opti-Coat™Pro is applied for that glossy finish.
Finally after a good 8hours, we finished off the car with a nice layer of Opti-Coat™Pro for that long term paint goodness. Check out the wet look and glossy finish.
We’ve always been a fan of the Proton Preve since its birth but never had we seen such a well kept and tip top condition Proton Preve. The owner is one of our longest friend and supporter, he decided that the car needed some love and attention after the front section had been repainted. This was merely a simple polish and restore. Read to find out more.
Upon arrival, the car was pretty hazy. With the complete R3 bodykit and an upgraded aftermarket wheel. The car sits just perfectly.
Being a rather well maintained ride, the paint was in quite a good condition. Just a few minor fix and some accidental damage that we could not restore.
Here is one of the scuffs that cannot be restored.
Paint wise, you can see that the paint shop did not do a very good job at the finishing. It is a common problem for cars that had been repainted. The typical paint shop are just not capable of that finer finish you are looking for, hence we are here to fix that.
We let the car cooled down before washing. Since it was rather straight forward, there wasn’t much to document. We’ll skip to the paint correction. Here is some photos of after polish.
A little haziness on the paint after the first pass.
Final finish cleared it off and you can actually see that metallic flakes more clearly.
Here’s a quick example of swirls detected under the sun.
After a minor polish, we cleared off the minor swirls.
Another minor swirl spot found under the sun.
Cleared it off. After shots.
After about 5hours, we finished the polishing and restoration process.
As a alternate finishing unlike our usual coating application. We finish the car with a generous coat of premium high quality wax. Check out that glossy mirror finish.
Today we have quite a special customer that drove all the way to leave the car with us for an entire day. This Mazda2 is barely 6 months old but already met so much abuse that its crying for a full makeover.
Have you ever expected that the underside of the front bonnet is glossier, shinier and more wet look than the entire car?
Here we have the car, just arriving from Singapore. With the bonnet area and wheels still piping hot, we had to let her cool down first. Meanwhile, our routine inspection for the paint was done.
There was a dull shade on the paint when looked closely.
Stains from bird droppings were quite visible on the paint.
There were even some very much hardened bird dropping splatter. We’ll be expecting a bad etching later.
Black cars can be rather deceiving in photos because they may look very reflective but their true condition is hidden behind that gloss.
6 months of poor car wash resulted in stains in areas like this.
Side mirrors were covered in bug splatters as well.
Moving on to the paint damages, we found some rather interesting amount of swirls on the paint, this doesn’t look like a 6 months old car with these amount of swirls.
More swirls and holograms found on the paint.
Holograms spotted on the door. Well, basically the whole car is covered in holograms and swirls as a result to “restore” the car but failed miserably.
We did a detailed wash and decontaminated the surface. Check out what the clay bar picked up from just 1 panel.
As we mentioned before, we’re expecting a bad bird dropping stain on the hood.
Another bird dropping stain visible after the wash.
After a few passes of polish, we came to a swirl free result.
More areas swirl free.
The door previously covered in holograms and swirls are now clear of damages.
Finally, a quick before.
We also manage to clear off the bird dropping stains that was etched into the paint. Fortunately the damage was not catastrophic yet. PS: pardon the polish residue as we only clear it up when the entire polishing process is over.
We spotted some rather deep scratch on the roof. Probably from an attempt to rub off bird dropping.
Manage to recover the damage. Dear readers, please do not rub off bird droppings as bird eat from the ground, sand does not get digested and the bird droppings actually contains sand in them, rubbing the bird dropping off will only result in scratches. In this case, we’re lucky to be able to remove the scratch, you might not be as lucky everytime.
Final outcome from the detailed polishing, the car was ready for the Opti-Coat™Pro.
After the final wash and coating application, the night came. Before we showcase the finishing, we did some quick final checks on the paint under LED and also the street lights. Results were amazing.
So here’s the final results of this makeover on the Mazda2 all the way from Singapore.