
Today we are working on the brand new Mazda CX-5, already impressed with the looks and all, we are excited as we are going to make her into a mirror! The coating we are using today is a custom formula developed by us over the years of experience in this industry. For more info, you can simply PM, E-mail or Whatsapp to us direct as this is not a sale post but a article featuring this ride’s process.

Upon arrival, we can instantly notice how dirty the car wash. Because of its colour, dirt may not be so visible.
|
Rain stains with a mixture of dust and sand.

The side panels were covered!

On to the paint condition, we were greeted by hologram marks.

Swirl marks were also visible all around the car.

More visible holograms.

Deep swirls spotted.

Some areas had lighter swirls

More severe swirls on some sections


Remember the deep swirls we spotted earlier.

After some much needed paint restoration, this was the outcome.

On the rear boot area, we can visibly see the swirls.

Restored.

All sections of the paint was corrected into this level of finishing.


Some sun shots to double check on the finishing.

Final inspection on the swirls.

And we were ready to apply the High Gloss Coat.

The High Gloss Coat is a 6H custom formula that with our constant R&D and follow up with clients, 2 years old and the first client that applied this coat still have zero issues with watermark and swirls!


Wheels were as usual covered in brake dust.

With the help from some pH neutral iron remover, we dissolved the brake dust for a cleaner finish.



The finishing was a mirror finish, giving the car a even more redefined shape and lines.

toilet bowl
All posts tagged toilet bowl

For this BMW, the owner schedule the time with us to send us the car. Giving us plenty of time to work on it to really bring out the best surface condition on it. Silver is one the hardest colour to gain the glossy wet look but we had done it many times already, this is just another example of our work.

Upon arrival, we did a detailed wash on the car, removing all contamination and tar spots. A brief clay bar treatment was done to the surface as well.

After drying off the car, we were immediately able to identify and spot some light hologram damage on the front hood.

Glossy piano black pillars were quite scratched up mostly due to bad washing mitts or road side wash.


The glossy piano black pillars are quite badly swirled up. Not forgetting the watermark stains.

With some masking tape to seal up the trims and rubber, we manage to restore the piano black surface to as if new.

On the light hologram marks we mentioned earlier.

After paint correcting the hologram mark.

To further make sure the surface had no longer any swirls or hologram damage, we checked again on major and tight surfaces.

Final conclusion of swirl free surface.


The wheels are as usual covered in brake dust as most European cars.

Lug nut areas are also slightly stained from brake dust build up

After detailing and Opti-Coat Pro application.


As usual, we leave the best results for your viewing without any text interruption.

Another mineral grey BMW came up on the job sheet. Seems like a BMW 1 series month this round. The best part, they have 2 of the same car! Check out our progress. Read on…

Upon arrival, the car was in rather dirty and dusty state. Being merely 1 week old, its pretty normal to see cars in this state.

Dirt and sand found on the rear hatch is the common sight.

The condition of the car was pretty much flawless with just some minor damages. This was one of it. Light swirls can be seen on the right of the LED.

On another spot, u can see slightly heavier swirl damage, but on the entire car we only spotted 2 of such spots.


As the weather was getting very very hot on this day, we speed up the process but had not documented the washing, claying and light tar removal.
On the paint correction, we manage to remove all of the damages as well. Here are some close ups.

On another section.

Being able to confirm the car had zero swirls left to correct, we washed down the car and got the surface ready for the final coating application.


Finally, we applied the Opti-Coat Pro paint protection coating onto the paint, by this time the sun was setting and here are the glossy, wet looking outcome.


