
Today, we would like to share with you this very special detailing session we did for this Perodua Kenari. We want to show you that it doesn’t matter what you drive, how expensive is the car, how high-end is the car, at the end of the day, protection is a must and when there is less to no protection over the past 10 years, this is what you get.

Upon arrival, we can clearly see that the car, although more than 10 years old, still looks spanking new and shiny.

Since it was raining, we took initiative of the situation to show you the protection level. The water beadings on the paint clearly indicates that there is no wax or any sealant on the paint.

The car may be more than 10 year old, still looks shiny, but after some inspection, we concluded that in the life time of this car, there were some slight accidents, some repaints, and some polishing done over the years.

With a DSLR, we snap high quality photos, again clearly indication the swirl and scratch level on the paint.

Some areas were severely oxidized. Added on PU/ABS/FRP body parts tend to oxidize quicker than the metal parts.

Most detailers will not take not of the taillights, we do.


The standard paint cleaning was done. From washing, degreasing, claying, stain removals, and watermark removals. We were able to get the car to a much better condition. We begin the paint correction with the Rupes BigFoot system with the combination of 3M Menzerna polishes.
With the use of this system and polish, This is the before.

This is the after.

On another area, the same paint condition prior correction.

The paint condition after correction. You may notice on the bottom left of the light, there are still some light swirls, this is common as detailing is not a magic trick, there are risks at paint correction and sometimes not every surface can be fully restored to flawless state.

As we mentioned, we take note on the taillights as well. Before any correction, the taillights are visibly dull and oxidized, resulting in a unattractive outlook.

After the correction was done, there taillights now look much better. Again, due to the severity and age of the swirls, the taillights were unable to be restored to a 100% state.

Detailing, its all about the details, this is an exhaust tip, not even a real part of the exhaust. It is merely an add-on attachment to the exhaust muffler. This is Before.

We polished the exhaust tip with Mother’s Mag and Aluminum polish to add that little bling to the finishing.


The wheels were in very good condition, besides the standard brake dust, there were less to no stains spotted.

Since only the front wheel is equipped with a disc rotor, brake dust build up is only visible in the front.

This is the wheel before cleaning.

During cleaing.

After cleaning.


This may not be the most interesting post, may not be the most executive car we post, but the true agenda we want to share is, regardless what car you drive, regardless the price tag, your car, we truly believe that as long you have the heart to protect, to care, you will have the time and effort to spend on some form of protection for your ride. PS: pardon the slight out of focus photos.

malaysia
All posts tagged malaysia


We have with us a Peugeot 408 Turbo, the car is currently at its first quarter. The car looked shiny as usual but then again, looks can be deceiving.

Upon arrival, we did a walk around to inspect the visible condition of the car.

There were some visible paint transfer.

Some rubber scruffs

Visible tree sap stain can be seen on the paint.

There were some random isolated deep scratches.

Swirls were quite serious on the paint work when LED light is used.





Before…

After

All panels were restored to its best state.



There were visible tar spots on the fender areas. So we dissolve it.


After around 6hours of polishing and detailing the paint work. We finally applied the coating.

Finally, the car is street worthy. Check out the insane transformation for a “Looks like Glossy Car” to “Really Glossy Car” The defination of the car’s shape is enhanced tremendously.


We are all the way in a rural village to get this Nissan Xtrail corrected and Opti-Coated. The car is brand new, barely reaching 3 days old. Due to its area of activity, its constantly exposed to mud, rain, bad road conditions, etc.

Upon arrival, we saw the car in a rather poor lighting condition. Making the car glossy as ever.

As we our eyes got closer to the car. There you can spot the amount of dirt.

On the glass, its a mixture mud, rain and sand.

We got our LED out and check the paint. Swirls were visible on the paint even though its white.


We washed the car and found that the paint had 0 protection.

On the glass, the water doesn’t flow off at all.

After finishing with the cleaning, we moved on to the correction stage. Here is step 1. Still some minor not so visible swirl.

Final step fully removed the swirl. Due to the age of the car, the damages are on a few areas only, hence we did spot repairs.


Finally, after about 5hours, we finally got to the coating stage, here are the results of the coat.

